Enamel and titanium jewellery
home   |   profile   |   Enamel   |   Titanium   |   shops   |   order   |   contact   |   Eλληνικά   
Titanium Relief Round Ring Titanium Ribbon Wire Jewels Butterflies Titanium Flowers Anneau Ploymista Patches Titanium Hearts stone ring


Enamel is essentially glass which is ground to a powder before being fired on to a metal base. Suitable metals for enameling include gold, silver, copper, aluminum, and steel. The ground glass is a combination of silica and soda ash with addition of small amount of metal oxides to give it colour. Enameling is the process of fusing layers of ground glass onto metal using a kiln or torch. Firings can take from 30 seconds to several minutes, with the kiln heated between 650°C and 1000°C, depending on the techniques and materials used.

Industrial, or liquid, enamels are enamel frits ground very finely and mixed with other components to make a liquid suspension.
This is applied to a metal surface with a spray gun, a brush, or by dipping.

The enamel is contained within wire cells (cloisons). These wires are usually fired onto a base coat of flux (a clear transparent enamel),
then filled with wet enamel. The wet enamel is often applied with quill in layers, a technique known as wet packing.
The piece is fired after each layer has been applied.

Recesses in the form of patterns or designs are carved or etched into the metal and the enamel is wet packed into these areas.

An extension of champlevé, the recesses are engraved with patterns or carved with a low relief design which can be seen as varying densities of colour through the transparent enamel.In this technique, the enamel is fired into an open metal framework, with the result resembling stained glass. It is particularly beautiful with lightshining through the transparent or translucent enamels.

by Atana